Soil Types [desigers perspective]
Awareness of the soil types and their geotechnical parameters are very important as the structural engineers and civil engineers. When […]
Soil Types [desigers perspective] Read Post »
Awareness of the soil types and their geotechnical parameters are very important as the structural engineers and civil engineers. When […]
Soil Types [desigers perspective] Read Post »
Single angle design for tension in accordance with Eurocode 3 is discussed in this article. Desing of the angle section
Single Angle Design for Tension as per EC3 Read Post »
Retaining wall types and their behavior is discussed in this article. Different classifications of retaining systems are also discussed. Why
Retaining Wall [ a detailed study] Read Post »
A structural engineer should be aware of answering the question of how to select concrete grade. Selecting a suitable concrete
How to Select Concrete Grade [designer’s guide] Read Post »
Beam design is a wide subject that covers a vast area in structural engineering design. The beam is one of
Axially loaded bolt connection design is discussed in detail with a worked example and while discussing the technical background related
Bolt Connection Design Using Eurocode 3 Read Post »
Knowing the properties of concrete is a must to structural engineering who engine with the design of cast-in-situ and precast
Properties of Concrete [useful information] Read Post »
Single angle section design using EN 1993-1-1 is discussed in this article by a worked example. Angle section subject to
Single Angle Section Design Worked Example Read Post »
Becoming section under reinforced section than over reinforced section is good in structural design. Under reinforced sections shows early warnings
Under Reinforced Section Design Read Post »
The over-reinforced section is considered critical when compared with the under-reinforced condition. If over-reinforced, the section can fail suddenly without
How to Check Section is Over Reinforced Read Post »
Depending on the strain of the section, categorization of the sections is done as a balance section, over the reinforced
Balanced, Over Reinforced and Under Reinforced Read Post »
Steel column design according to Eurocode 3, EN 1993-1-1, is discussed in this article by a worked example. Clarifications on
Steel Column Design EC3 Worked Example Read Post »