Structural loads, structural analysis and structural design are simply explained with the worked example for easiness of understanding. Element designs with notes and discussions have added to get comprehensive knowledge. Also, construction materials, shoring system design, water retaining structures, crack width calculations, etc. have discussed in addition to other aspects.
Beam design according to Eurocode 2 is discussed with a worked example. Eurocode 2 worked example for singly reinforced beam […]
Worked Example Singly Reinforced Beam Design using EC2 Read Post »
The procedure to be followed in designing of singly reinforced concrete beams to Eurocode 2 is discussed in the article.
Design of Singly Reinforced Beam Read Post »
Stability Checks for Retaining Walls Overturning and sliding checks are done to make sure the stability of retaining walls. In
Stability Calculation of Retaining Walls Read Post »
Singly Reinforced Section design Beam design can be done for different codes depending on specific requirements. Before designing a beam,
Beam Design to BS 8110 Read Post »
Staircase design using eurocode 2 Waist = 150 mmRise = 150 mm Treads =
The modulus of the subgrade reaction of soil is considered when the elastic behavior of the soil is used for
Modulus of Subgrade Reaction | Soil Analysis Tool Read Post »
Superplasticizers which are commonly identified as high range water reducers have become of most valuable findings in the construction industry
Superplasticizers [key factors to be known] Read Post »
Temperature control of immature concrete is a very important aspect in concrete technology for avoiding internal cracking due to higher
Early Age Temperature of Concrete Read Post »
TESTING OF AGGREGATES AN OVERVIEW Aggregates shall be cleaned, hard, dense, durable and frost resistant, shall have a stable moisture
Types of Testing for Aggregates Read Post »
Cement is one of the most widely used construction material today. It can’t even imagine construction without cement even different alternative
Testing of Fly Ash Read Post »
Tunnel design is done in reservoirs or underground roads are not constructed every day like other structures. It could be
Tunnel Design [a guide to designers] Read Post »
Stability analysis of structures is mainly considered as sliding, overturning and uplifting. Sliding and overturning are due to lateral loads
Stability Analysis of Structures Read Post »